Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Window Motor
Remove power window motor. See POWER WINDOW MOTOR under REMOVAL & INSTALLATION. Secure power window motor gently in vise. Using fused jumper wires, briefly apply battery voltage to terminal No. 1 and ground terminal No. 2 at power window motor 2-pin connector. Power window motor should operate. When polarity is reversed, power window motor should operate in opposite direction. If power window motor does not operate as described or is noisy, replace power window motor.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.