Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scheduled Maintenance Service: Notes
An on-board computer determines service intervals based on the style and amount of driving. The operator is signaled by a series of LEDs showing the proximity of service needs. Five Green LEDs will progressively go out showing the approaching need of service. When the last Green light goes out an Amber light will illuminate indicating service is due immediately. A Red LED will illuminate if the maintenance interval has been exceeded.
The maintenance services are performed in sequence: Engine Oil Service, Inspection I, Engine Oil Service, Inspection II. An Annual Service is to be performed with, or in addition to, all other services when due.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.