Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle Loading: Notes
In order to obtain the correct ride height, the vehicle must be loaded with the specified weight. The normal specified weight for most vehicles is as follows:
- 68 kg. in each front passenger seat
- 68 kg in the rear seat
- 21 kg in the trunk
- Fuel tank full.
Not all vehicle need to be weighed down. Usually E39 M5 and E36/E46 M3 are measured without any weight. The proper test conditions can be found under "Normal Position/Inspection Conditions".
If the vehicle fuel tank is not full, compensate by adding weight in the trunk. Fuel is approximately 7 pounds (about 3.2kg) per gallon. For example: If the vehicle has an 18 gallon tank and it is 1/2 full, add about 63 lbs. (about 28kg.)
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.