Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW1992325IS AUTOMATICREPAIR AND DIAGNOSISSUSPENSIONWHEEL ALIGNMENTSPECIFICATIONS & PROCEDURESWHEEL ALIGNMENT SPECIFICATIONSE53
1992 BMW 325is Automatic
Wheel Alignment Specifications: E53
1992 BMW 325is AutomaticSECTION E53
WHEEL ALIGNMENT SPECIFICATIONS (X5)
| Application | Preferred | Range | |||
|---|---|---|---|---|---|
| Total Toe | |||||
| Front | .3° | .17 To .43° | |||
| Rear | .3° | .13 To .47° | |||
| Camber (1) | |||||
| Front | -.2° | -.62 To .22° | |||
| Rear | -1.83° | -2.17 To -1.17° | |||
| Track Differential Angle With 20° Lock On Inside Wheel (1) | -1.58° | -2.08 To -1.08° | |||
| Caster (1) | |||||
| With -10 To 10° Wheel Lock | 6.83° | 6.33 To 7.33° | |||
| With -20 To 20° Wheel Lock | 7.1° | 6.6 To 7.6° | |||
| Front Wheel Displacement | 0° | -.25 To .25° | |||
| Rear Geometrical Axis Deviation | 0° | -.2 To .2° | |||
| Maximum Wheel Lock | |||||
| Inside Wheel | About 37.1° | N/A | |||
| Outside Wheel | About 31.1° | N/A | |||
| Turning Circle | About 39.7 Ft. (12.1 M) | N/A | |||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.