SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW1992325IS AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)MAINTENANCEPROCEDURESINTERFERENCE VERIFICATION CHECK FOR OHC ENGINETIMING BELT INTERFERENCE VERIFICATION INFORMATIONTIMING BELT INTERFERENCE CHECK MENU
1992 BMW 325is Automatic

Timing Belt Interference Check Menu

1992 BMW 325is AutomaticSECTION Timing Belt Interference Check Menu
TIMING BELT INTERFERENCE VERIFICATION (1)

Application Engine Replacement Interval (Miles)
325 series
1982-91 (2) 2.5L 6-Cyl 60,000
1982-91 (2) 2.7L 6-Cyl 60,000
325ic
1992 (2) 2.5L 6-Cyl 60,000
525i
1989-91 (2) 2.5L 6-Cyl 60,000
525iA
1989-91 (2) 2.5L 6-Cyl 60,000
528e
1982-88 (2) 2.5L 6-Cyl 60,000
1982-88 (2) 2.7L 6-Cyl 60,000
(1) Other interference engine applications may exist which are not indicated here.
(2) Interference engine. Check for possible damage to piston(s) or valve(s) if there has been a timing belt failure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.