Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fluids
Quick Lookups: Fluids — 1983 BMW 320i Automatic Service Manual : Fluids FLUID CAPACITIES Fluid Type Application Standard Metric Fluid Spec Note S/H Automatic Transmission Fluid 1.8L Eng 2.10 QTS. 1.98 L Automatic Transmission Fluid DEXRON S Differential Gear Oil 1.8L Eng 0.95 QTS. 0.89 L API - GL-5, SAE 90W Hypoid Gear Oil S Engine Coolant 1.8L Eng 7.40 QTS. 7 L S Engine Oil 1.8L Eng w/Filter 4.26 QTS. 4.03 L SAE 5W-30 Synthetic Engine Oil may be used, but it is not required. Mineral based oil maybe used on pre-1999 models. For reliable engine performance, mineral based engine oil viscosity must be matched to the following temperature ranges, which the vehicle will be operated: -40Deg.F to about 15Deg.F (SAE 5W-20); -40 Deg.F to about 25Deg. F (SAE 5W-30); -30Deg. F to about 40Deg F (SAE 10W-30); -30Deg. F to about 60Deg. F (SAE 10W-40); 0Deg. to about 105Deg. F (SAE 15W-50); 15Deg. F to above 120Deg. F (SAE 20W-50). S Engine Oil 1.8L Eng w/o Filter 4.00 QTS. 3.78 L SAE 5W-30 Synthetic Engine Oil may be used, but it is not required. Mineral based oil maybe used on pre-1999 models. For reliable engine performance, mineral based engine oil viscosity must be matched to the following temperature ranges, which the vehicle will be operated: -40Deg.F to about 15Deg.F (SAE 5W-20); -40 Deg.F to about 25Deg. F (SAE 5W-30); -30Deg. F to about 40Deg F (SAE 10W-30); -30Deg. F to about 60Deg. F (SAE 10W-40); 0Deg. to about 105Deg. F (SAE 15W-50); 15Deg. F to above 120Deg. F (SAE 20W-50). S Fuel Tank 1.8L Eng 15.30 GALS. 57.91 L S Manual Transmission Fluid 1.8L Eng 1.20 QTS. 1.13 L API - GL-4 Hypoid Gear Oil SAE 90W S Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON S Windshield Washer Fluid 3.20 QTS. 3.02 L Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations).
Mix the washer fluid before adding it to the reservoir. S
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.