1974 BMW 3.0CS Automatic TransFACTORY OEM SERVICE PROCEDURE

Alternators - BOSCH: Description

Bosch alternators are conventional three-phase, self-rectifying type alternators. Nine rectifier diodes are connected to the stator windings (three to each phase lead). The diodes change the alternator A.C. voltages to D.C. voltages coming out of the "B+" and the "D+" terminals of the alternator.

SPECIFICATIONS

Alternator (1) Amp Output @ RPM Max. Current
G1 14V 33A 27 33 @ 5000 40A
K1 14V 35A 20 23 @ 2000 35A
K1 14V 45A 20 30 @ 2000 45A
K1 14V 45A 22 30 @ 2200 45A
K1 14V 50A 20 33 @ 2000 50A
K1 14V 55A 20 36 @ 2000 55A
K1 14V 55A 22 36 @ 2200 55A
(1) Charging voltage: 14.

Field Coil Resistance  - 4.0 ohms + 10% measured at slip rings at normal ambient temperature.

Stator Windings Resistance  -.2 ohms + 10% measured between the phase output terminals.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.