Fig 1: Exploded View Of Control Module For Adaptive Cruise Control

Courtesy of AUDI OF AMERICA, LLC

Cover
- With Heating Element for Adaptive Cruise Control Radar Sensor - Z185-
- Removing and Installing. Refer to Heating Element for Adaptive Cruise Control Radar Sensor - Z185-, REMOVING AND INSTALLING .
Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
- Adjusting. Refer to RADAR SENSOR (Control Module for Adaptive Cruise Control -J428-), ADJUSTING .
Cover
Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
Bolt
- 4 Nm
- Quantity: 4
Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Quantity: 3
Stud Bolt
- Quantity: 3
- Note the adjustment dimension. Refer to Installing - Measure the dimension -a- at all stud bolts using the : VAS6335 and correct if necessary. .
Clip
- Quantity: 2
- Open version
- Cannot be removed without being damaged
Clip
- Closed version
- Cannot be removed without being damaged
- Note the installation position

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Overview - Control Module For Adaptive Cruise Control