Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Audi Q5 e PrestigeFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.40 OZS. | 0.15 L | Electronically Driven Compressor | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.34 LBS. | 0.6 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Initial Fill | 6.80 QTS. | 6.43 L | VOLKSWAGEN Automatic Transmission Fluid | Approximate capacity. | S | |
| Automatic Transmission Fluid | Refill | 4.80 QTS. | 4.54 L | VOLKSWAGEN Automatic Transmission Fluid | Approximate capacity. | S | |
| Brake Fluid | 1.10 QTS. | 1.04 L | Part No. B 000 750 M3. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Coolant | 10.50 QTS. | 9.93 L | Part No. G A13 A8J M1. Part numbers are for reference only. Approximate capacity. | S | |||
| Engine Oil | w/Filter | 5.50 QTS. | 5.2 L | AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00 | Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards. Part numbers are for reference only. Approximate capacity. | S | |
| Windshield Washer Fluid | 5.50 QTS. | 5.2 L | Part No. 8X0 096 320 Part numbers are for reference only. Approximate capacity. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.