Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Audi SQ5 Premium PlusFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.70 OZS. | 0.1 L | DENSO | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-1234yf | 2018 Vehicles produced during 2017 may now be equipped with R1234yf instead of R134a. Be sure to carefully check your vehicle refrigerant and PAG oil requirements. | S | ||
| Automatic Transmission Fluid | Initial Fill | 9.00 QTS. | 8.51 L | VOLKSWAGEN Automatic Transmission Fluid G 060 162 A2 | Part numbers are for reference only. Approximate capacity. | S | |
| Automatic Transmission Fluid | Refill | 4.10 QTS. | 3.88 L | VOLKSWAGEN Automatic Transmission Fluid G 060 162 A2 | Part numbers are for reference only. Approximate capacity. | S | |
| Brake Fluid | 1.10 QTS. | 1.04 L | Part No. B 000 750. | S | |||
| Engine Coolant | 10.50 QTS. | 9.93 L | G13 TL-VW774J | Dilute with distilled water. | S | ||
| Engine Oil | w/Filter | 7.70 QTS. | 7.28 L | Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00, VW 509 00 | Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards. Part numbers are for reference only. Approximate capacity. | S | |
| Transfer Case Fluid | 1.10 QTS. | 1.04 L | Part No. G 055 145 A2. Approximate capacity. | S | |||
| Windshield Washer Fluid | 5.50 QTS. | 5.2 L | S | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.