2016 Audi S8 BaseFACTORY OEM SERVICE PROCEDURE

Pinpoint Test Purpose

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

To verify PSCM DTC P061A is present and provide diagnostics if DTC P061A is currently active in the PSCM.

  1. Y1: VERIFY THE PSCM DTCΒ 
    • Clear the PSCM DTCs.
    • Ignition OFF.
    • Wait at least 90 seconds for the modules to completely shut off.
    • Carry out the PSCM self-test.
    • Does DTC P061A return?Β 
      Yes No
      INSTALL a new EPAS gear.
      REFER to POWER STEERING SYSTEM .
      ORDER a replacement EPAS gear and INCLUDE the RVC on the form.
      If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
      If the PSCM does not list DTC P061A, DISCONTINUE this test and REFER to the DTC Chart for direction.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.