WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Windshield Projection Control Module Overview

Courtesy of AUDI OF AMERICA, LLC

Screw
- Quantity 4
- Tightening specification, refer to OVERVIEW - INSTRUMENT PANEL, WINDSHIELD PROJECTION (HEAD UP DISPLAY) .
Bracket
- For windshield projection control module.
- Removing and installing, refer to OVERVIEW - INSTRUMENT PANEL, WINDSHIELD PROJECTION (HEAD UP DISPLAY)
Windshield Projection Head Up Display Control Module -J898-
- Removing and installing, refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE -J898- .
- Calibrating, refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE -J898-, CALIBRATING .
Screw
- 5.5 Nm
Screw
- 5.5 Nm
Upper Cover
- Removing and installing, refer to OVERVIEW - INSTRUMENT PANEL, WINDSHIELD PROJECTION (HEAD UP DISPLAY)
Screw
- 5.5 Nm
Central Tube

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Windshield Projection Control Module -J898- Overview

Use the Manual With the Right Hardware

When to See a Mechanic