2016 Audi A6 Premium PlusFACTORY OEM SERVICE PROCEDURE

Core Plug Replacement

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Special Tool(s)

GFD134517Courtesy of FORD MOTOR COMPANY
Slide Hammer 100-001 (T50T-100-A)
Material

Item Specification
High Temperature Retaining CompoundLoctite ® 620™, Permatex ® 62050 WSK-M2G349-A9
Motorcraft ® Threadlock 262TA-26 WSK-M2G351-A6
NOTE: It is necessary to use High Temperature Retaining Compound Loctite ® 620™/Permatex ® 62050 or equivalent on all 3 valve modular engine cylinder head cup plugs. If not used, the cylinder head cup plugs could leak or seep, causing serious engine damage.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.