Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A7REPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSELECTRICAL COMPONENTS LOCATIONS & CONNECTOR END VIEWSCOMP. LOC. VEHICLE REAR MODULESREAR VIEW CAMERA SYSTEM CONTROL MODULE J772REAR VIEW CAMERA SYSTEM CONTROL MODULE -J772-, CONNECTOR VIEWS, THROUGH MY 2014
2012 Audi A7
Rear View Camera System Control Module -J772-, Connector Views, Through My 2014
2012 Audi A7SECTION Rear View Camera System Control Module -J772-, Connector Views, Through My 2014
- 54-Pin Connector -T54a-/Double Connector -T2df-
| T54a | Designation |
|---|---|
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| 20 | |
| 21 | |
| 22 | |
| 23 | |
| 24 | |
| 25 | |
| 26 | |
| 27 | |
| 28 | |
| 29 | |
| 30 | |
| 31 | |
| 32 | |
| 33 | |
| 34 | |
| 35 | |
| 36 | |
| 37 | |
| 38 | |
| 39 | CAN-Bus Instrument Cluster, Low to Wiring junction for instrument cluster CAN-Bus, Low TV40 |
| 40 | CAN-Bus Instrument Cluster, High to Wiring junction for instrument cluster CAN-Bus, High TV36 |
| 41 | |
| 42 | |
| 43 | Terminal 30, from Fuse Carrier 3 ST3 in Fuse panel F SF |
| 44 | Terminal 31, to 51 Ground Connection (in right luggage compartment) |
| 45 | |
| 46 | |
| 47 | Rear View Camera R189 |
| 48 | Rear View Camera R189 |
| 49 | |
| 50 | |
| 51 | |
| 52 | |
| 53 | |
| 54 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.