2011 Audi A8 BaseFACTORY OEM SERVICE PROCEDURE

Pin Arrangements Level Control System Control Module -J197

-T9a- (A) Designation
1 Terminal 30, from Fuse Panel F -SF-
2  
3 Terminal 31, to 391 Ground Connection 26 {In Main Wiring Harness)
675 Ground Connection 2 (in right luggage compartment)
4  
5  
6 Terminal 15, from Fuse Panel F -SF-
7  
8  
9  
-T18b- (B) Designation
1 Power supply valves
2 Left Front Suspension Strut Valve-N148-
3 Right Front Suspension Strut Valve -N149-
4 Valve Block
5 Left Rear Suspension Strut Valve -N150-
6 Right Rear Suspension Strut Valve -N151-
7 Valve Block
8 Level Control Accumulator Valve-Nail-
9 Level Control System Compressor Relay -J403-
10  
11  
12  
13  
14  
15  
16  
17  
18  
-T15a- (C) Designation
1 Left Front Level Control System Sensor -G78-
2 Left Front Level Control System Sensor -G78-
3 Left Front Level Control System Sensor -G78-
4 Right Front Level Control Sensor -G289-
5 Right Front Level Control Sensor -G289-
6 Right Front Level Control Sensor -G289-
7 Left Rear Level Control System Sensor -G76-
8 Left Rear Level Control System Sensor -G76-
9 Left Rear Level Control System Sensor -G76-
10 Right Rear Level Control System Sensor -G77-
11 Right Rear Level Control System Sensor -G77-
12 Right Rear Level Control System Sensor -G77-
13 Level Control Pressure Sensor -G291-
14 Level Control Pressure Sensor -G291-
15 Level Control Pressure Sensor -G291-
-T12a- (D) Designation
1 Left Front Dampening Adjustment Valve -N336-
2 Left Rear Dampening Adjustment Valve -N338-
3  
4 Left Front Dampening Adjustment Valve -N336-
5 Right Front Dampening Adjustment Valve -N337-
6  
7 Left Rear Dampening Adjustment Valve -N338-
8 Right Rear Dampening Adjustment Valve -N339-
9 Level Control Pump Temperature Sensor -G290-
10 Right Front Dampening Adjustment Valve -N337-
11 Right Rear Dampening Adjustment Valve -N339-
12 Level Control Pump Temperature Sensor -G290-
-T6b- (E) Designation
1 FlexRay-Bus
2 FlexRay-Bus
3  
4 Sensor Electronics Control Module -J849-, only High-Voltage Model
5 Sensor Electronics Control Module -J849-, only High-Voltage Model
6  

Back To Overview  → COMP. LOC. CONTROL MODULES VEHICLE REAR  .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.