Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2009A6 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSELECTRICAL COMPONENT LOCATORCONNECTORS
2009 Audi A6 Base
Electrical Component Locator: Connectors
2009 Audi A6 BaseSECTION Connectors
CONNECTORS LOCATION
| Component | Location |
|---|---|
| T2ba (Black, 2 Pin) (5) | On driver's seat connector station. See Figure. |
| T2bb (Black, 2 Pin) (5) | On front passenger's seat connector station. See Figure. |
| T3e (Gray, 3 Pin) | Left rear of engine compartment, on bulkhead. See Figure. |
| T3f (Yellow, 3 Pin) (1) | On driver's seat connector station. See Figure. |
| T3g (Yellow, 3 Pin) (1) | On front passenger's seat connector station. See Figure. |
| T4a (Black, 4 Pin) | Right rear of engine compartment, on bulkhead. See Figure. |
| T4b (Brown, 4 Pin) | Left rear of engine compartment, on bulkhead. See Figure. |
| T6a (3.2L) (Black, 6 Pin) | Right rear of engine compartment, on bulkhead. See Figure. |
| T6a (4.2L) (Black, 6 Pin) | Right rear of engine compartment, on bulkhead. See Figure. |
| T6b (3.2L) (Black, 6 Pin) | Left rear of engine compartment, on bulkhead. See Figure. |
| T6b (4.2L) (6 Pin) | Left rear of engine compartment, on bulkhead. See Figure. |
| T6e (Green, 6 Pin) (3) | On driver's seat connector station. See Figure. |
| T6f (Green, 6 Pin) (3) | On front passenger's seat connector station. See Figure. |
| T10a (Violet, 10 Pin) (5) | On left E-box plenum chamber connector station. See Figure. |
| T10b (Blue, 10 Pin) (7) | On left "A" pillar connector station. See Figure. |
| T10e (Gray, 10 Pin) (8) | On left "A" pillar connector station. See Figure. |
| T10f (White, 10 Pin) (8) | On right "A" pillar connector station. See Figure. |
| T10g (Black, 10 Pin) (9) | On right "A" pillar connector station. See Figure. |
| T10h (Pink, 10 Pin) (3) | On right "A" pillar connector station. See Figure. |
| T10i (Red, 10 Pin) (2) | On driver's seat connector station. See Figure. |
| T10k (Red, 10 Pin) (2) | On front passenger's seat connector station. See Figure. |
| T10l (Black, 10 Pin) (4) | On driver's seat connector station. See Figure. |
| T10m (Black, 10 Pin) (4) | On front passenger's seat connector station. See Figure. |
| T10v (White, 10 Pin) (4) | On left E-box plenum chamber connector station. See Figure. |
| T17a (Red, 17 Pin) (1) | On left E-box plenum chamber connector station. See Figure. |
| T17c (White, 17 Pin) (3) | On left E-box plenum chamber connector station. See Figure. |
| T17d (Black, 17 Pin) (9) | On left "A" pillar connector station. See Figure. |
| T17e (Red, 17 Pin) (4) | On left "A" pillar connector station. See Figure. |
| T17f (Green, 17 Pin) (11) | On left "A" pillar connector station. See Figure. |
| T17g (Brown, 17 Pin) (10) | On left "A" pillar connector station. See Figure. |
| T17h (Orange, 17 Pin) (6) | On left E-box plenum chamber connector station. See Figure. |
| T17i (Red, 17 Pin) (10) | On right "A" pillar connector station. See Figure. |
| T17k (Orange, 17 Pin) (6) | On right "A" pillar connector station. See Figure. |
| T17l (Brown, 17 Pin) (2) | On right "A" pillar connector station. See Figure. |
| T17o (Brown, 17 Pin) (2) | On left E-box plenum chamber connector station. See Figure. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.