Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Audi S4 AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS FRONT (FN3 & FNR-G60)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Brake Line (Front Wheels) | 11 (15) | |
| Caliper-To-Carrier Bolts (Guide Pins) | ||
| FN3 | 18 (25) | |
| FNR-G60 | 22 (30) | |
| Carrier-To-Wheel Bearing Housing Bolts (FN3) | ||
| M12x1.5x35 | 96 (130) | |
| M14x1.5x35 | 148 (200) | |
| Carrier-To-Wheel Bearing Housing Bolts (FNR-G60) | ||
| M14x1.5x38 | 148 (200) | |
| Master Cylinder-To-Booster (Self-Locking Nut) | 36 (49) | |
| Booster-To-Firewall Nut (Torx Bolt) | 18 (25) | |
| Wheel Lug Bolts | 90 (120) | |
TORQUE SPECIFICATIONS FRONT (HP2)
| Application | Ft. Lbs. (N.m) |
|---|---|
| Brake Line (Front Wheels) | 11 (15) |
| Carrier-To-Wheel Bearing Housing Bolts | 140 (190) |
| Master Cylinder-To-Booster (Self-Locking Nut) | 36 (49) |
| Booster-To-Firewall Nut (Torx Bolt) | 18 (25) |
| Wheel Lug Bolts | 90 (120) |
TORQUE SPECIFICATIONS FRONT (BREMBO)
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Brake Line (Front Wheels) | 11 (15) | ||
| Carrier-To-Wheel Bearing Housing Bolts | 81 (110) | ||
| Damper Bracket Bolts (RS6) | (1) 18 (25) | ||
| Master Cylinder-To-Booster (Self-Locking Nut) | 36 (49) | ||
| Booster-To-Firewall Nut (Torx Bolt) | 18 (25) | ||
| Wheel Lug Bolts | 90 (120) | ||
|
|||
TORQUE SPECIFICATIONS REAR (C38 & C43)
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Brake Line (Front Wheels) | 11 (15) | |||
| Caliper-To-Carrier Bolts (Guide Pins) | ||||
| C38 | 26 (35) | |||
| C43 | 22 (30) | |||
| Carrier-To-Wheel Bearing Housing Bolts (C38) (1) | 70 (95) | |||
| Wheel Lug Bolts | 90 (120) | |||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.