1992 Audi 80 Base, 2.3 C, AutomaticFACTORY OEM SERVICE PROCEDURE

Fuel Pump

NOTE: Fuel pump performance measures fuel pressure and volume availability, not regulated fuel pressure.
FUEL PUMP PERFORMANCE

Application Pressure psi (kg/cm2 ) Volume In 30 Sec.Pts. (L)
2.3L 89-94 (6.3-6.6) (1) 2.1 (1.0)
(1) Pressure must not drop below 51 psi (3.6 kg/cm2 ) after 10 minutes or 49 psi (3.4 kg/cm2 ) after 20 minutes.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.