Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1987 Audi Coupe StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | 2.2L Eng | 3.20 QTS. | 3.02 L | Automatic Transmission Fluid DEXRON for torque converter and Hypoid Oil SAE 90 (Mil-L-2105 B or API - GL-5) for final drive | S | ||
| Brake Fluid | N/A | N/A | DOT 4 Brake Fluid | S | |||
| Engine Coolant | 2.2L Eng | 8.60 QTS. | 8.13 L | Phosphate-free antifreeze containing ethylene-glycol | S | ||
| Engine Oil | 2.2L Eng | w/Filter | 4.00 QTS. | 3.78 L | SAE 5W-20/30 (Below -20Deg.F to Above 20Deg.F), 10W-30/40 (Below -5Deg.F to Above 65Deg.F), 15W-40/50 (Below 5Deg.F to Above 85Deg.F), 20W-40/50 (Below 15Deg.F to Above 85Deg.F). | S | |
| Engine Oil | 2.2L Eng | w/o Filter | 3.50 QTS. | 3.31 L | SAE 5W-20/30 (Below -20Deg.F to Above 20Deg.F), 10W-30/40 (Below -5Deg.F to Above 65Deg.F), 15W-40/50 (Below 5Deg.F to Above 85Deg.F), 20W-40/50 (Below 15Deg.F to Above 85Deg.F). | S | |
| Fuel Tank | 2.2L Eng | 15.90 GALS. | 60.18 L | Reserve tank of 2.1 gal. | S | ||
| Manual Transmission Fluid | N/A | N/A | Hypoid Oil SAE 80 or SAE 80W-90 | S | |||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid | Part No. G 002 000 or equivalent. | S | ||
| Windshield Washer Fluid | 2.2L Eng | 1.90 QTS. | 1.79 L | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.