1983 Audi QuattroFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Engine Coolant 9.80 QTS. 9.27 L Phosphate-free antifreeze containing ethylene-glycol S
Engine Oil w/Filter 4.50 QTS. 4.25 L SAE 5W-20/30 (-20Deg.F to 15Deg.F), 10W-30 (0Deg.F to 50Deg.F), 15W-40/50 (5Deg.F to 85Deg.F), 20W-40/50 (15Deg.F to 85Deg.F) S
Engine Oil w/o Filter 4.00 QTS. 3.78 L SAE 5W-20/30 (-20Deg.F to 15Deg.F), 10W-30 (0Deg.F to 50Deg.F), 15W-40/50 (5Deg.F to 85Deg.F), 20W-40/50 (15Deg.F to 85Deg.F) S
Fuel Tank 23.80 GALS. 90.09 L Reserve of 3.7 gal. S
Manual Transmission Fluid 3.80 QTS. 3.59 L for final drive-front. 2.3 qt.. for final drive-rear. -- Brand named Hyped oil designated "GL-4" according to the API system, or oil conforming to Mil-L-2105. SAE 80W or SAE 90W S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON S
Windshield Washer Fluid Front 1.90 QTS. 1.79 L S
Windshield Washer Fluid Rear 2.20 QTS. 2.08 L S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.