Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1983 Audi 5000 BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | 3.20 QTS. | 3.02 L | Automatic Transmission Fluid DEXRON for torque converter and Hypoid Oil SAE 90 (Mil-L-2105 B or API - GL-5) for final drive | S | |||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | S | |||
| Engine Coolant | 2.0L Eng | 10.00 QTS. | 9.46 L | Phosphate-free antifreeze containing ethylene-glycol | S | ||
| Engine Oil | 2.0L Eng | w/Filter | 5.00 QTS. | 4.73 L | SAE 5W-20/30 (-20Deg.F to 15Deg.F), 10W-30 (0Deg.F to 50Deg.F), 15W-40/50 (5Deg.F to 85Deg.F), 20W-40/50 (15Deg.F to 85Deg.F) | Difference between "min" and "max" marks on dipstick is approx. 1.qt. | S |
| Engine Oil | 2.0L Eng | w/o Filter | 4.50 QTS. | 4.25 L | SAE 5W-20/30 (-20Deg.F to 15Deg.F), 10W-30 (0Deg.F to 50Deg.F), 15W-40/50 (5Deg.F to 85Deg.F), 20W-40/50 (15Deg.F to 85Deg.F) | Difference between "min" and "max" marks on dipstick is approx. 1.qt. | S |
| Fuel Tank | 19.80 GALS. | 74.95 L | Reserve of 2.1 gal. | S | |||
| Power Steering Fluid | 0.80 QTS. | 0.75 L | S | ||||
| Windshield Washer Fluid | 1.80 QTS. | 1.7 L | S | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.