1982 Audi 5000 Base, Automatic TransFACTORY OEM SERVICE PROCEDURE

Service Specifications

BELT ADJUSTMENT

Application (1) Deflection In. (mm)
All Belts .3-.5 (10-15 mm)
(1) with a 20 lb. (9 kg) load applied at the midway point on the belt.
REPLACEMENT INTERVALS

Component Miles
Oil Filter (1) 15, 000
Air Filter 30, 000
Fuel Filter 15, 000
PCV Valve 30, 000
Oxygen Sensor 30, 000
Spark Plugs 30, 000
(1) Turbo models have 2 oil filters. Change both every 15, 000 miles.
FLUID CAPACITIES

Application Quantity
Crankcase (Includes Filter)
  Quattro 4.5 qts. (4.2L)
  All Other Models 4.8 qts. (4.5L)
Cooling System (Includes Heater)
  4000 & 5000 8.6 qts. (8 1L)
  5000 Turbo & Quattro 10.0 qts. (9.5L)
Man. Trans. (SAE 80W-90)
  4000 1.7 pts. (1.6L)
  5000 2.7 pts. (2.5L)
  Quattro 3.4 pts. (3.2L)
Auto. Trans. (Dexron) 3.2 pts. (3.0L)
Auto. Trans. Final Drive (SAE 90)
  4000 0.8 pts. (0.7L)
  5000 & 5000 Turbo 1.1 pts. (1.0L)
Fuel Tank
  4000 15.9 gals. (63.6L)
  5000, 5000 Turbo & Quattro 19.8 gals. (74.8L)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.