Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1982 Audi 5000 Base, Automatic TransFACTORY OEM SERVICE PROCEDURE
Service Specifications
BELT ADJUSTMENTS
| Application | (1) Deflection In. (mm) | ||
|---|---|---|---|
| All Belts | .3-.5 (10-15 mm) | ||
|
|||
REPLACEMENT INTERVALS
| Component | Miles |
|---|---|
| Oil Filter | 15, 000 |
| Fuel Filter | 7500 |
| Air Filter | 30, 000 |
| PCV Valve | 30, 000 |
FLUID CAPACITIES
| Application | Quantity |
|---|---|
| Crankcase (Includes Filter) | 4.5 qts. (4.2L) |
| Cooling System (Includes Heater) | 9.9 qts. (9.3L) |
| Manual Transaxle (SAE 80) | 2.0 qts. (1.9L) |
| Automatic Transaxle (Dexron) | 3.2 qts. (3.0L) |
| Fuel Tank | 19.8 gals. (37.0L) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.