2017 Alfa Romeo Giulia Base, AWDFACTORY OEM SERVICE PROCEDURE

Torque Specifications

TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Airbag Pyrotechnic Fuse Mounting Nut 11 - 97  
Front Impact Sensor Mounting Screw 8 - 71  
B-Pillar Impact Sensor Mounting Screw 8 - 71  
Side Curtain Airbag Mounting Screw 9 - 80  
Occupant Restraint Controller Mounting Nut 8 - 71  
Knee Airbag Mounting Screw - - -  
Seat Airbag Mounting Nut 8 - 71  
Front Seat Belt Buckle Mounting Screw 40 29.5 -  
Rear Seat Belt Buckle Mounting Screw 40 29.5 -  
Front Seat Belt Anchor Tensioner Mounting Screw 40 29.5 -  
Rear Outboard Seat Belt Retractor Mounting Screw 40 29.5 -  
Rear Outboard Seat Belt Lower Anchor To C-Pillar Mounting Screw 40 29.5 -  
Seat Belt Turning Loop To B-Pillar Screw 40 29.5 -  
Front Seat Belt Retractor To B-Pillar Mounting Screw 40 29.5 -  
Rear Center Seat Belt Retractor Mounting Screw 40 29.5 -  
Passenger Airbag Support Mounting Screw 24 18 -  
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.