Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Alfa Romeo 4C BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.40 OZS. | 0.1 L | Idemitsu PS-D1 | S | |||
| Air Cond Refrigerant | 0.82 LBS. | 0.37 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Control System | 1.50 QTS. | 1.41 L | MOPAR C Series DDCT Sae 75W Hydraulic Fluid or equivalent | Failure to use the correct fluid may affect the function or performance of the transmission. | S | |
| Automatic Transmission Fluid | Gearbox | 2.00 QTS. | 1.89 L | Full synthetic 75W-85 Manual Transmission Fluid meeting MS.90030-M2 and API - GL-4 specification | Failure to use the correct fluid may affect the function or performance of the transmission. | S | |
| Brake Fluid | N/A | N/A | MOPAR DOT 4 Brake Fluid | If MOPAR Brake Fluid DOT 4 is not available, then MOPAR Brake Fluid DOT 3, is acceptable. | S | ||
| Engine Coolant | 11.20 QTS. | 10.59 L | MOPAR Antifreeze/Coolant 10 year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent. | S | |||
| Engine Oil | 6.10 QTS. | 5.77 L | API Certified Synthetic Engine Oil. SAE 5W-40 | Meeting the requirements of Chrysler Material Standard MS-12991. | S | ||
| Fuel Tank | 10.50 GALS. | 39.74 L | Reserve tank capacity: 1.1 gals. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.