Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2015 Acura TLX Base, 2.4L Eng
Quick Lookups: Fluids
2015 Acura TLX Base, 2.4L EngSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.60 OZS. | 0.07 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | HFC-134a (R-134a) | Approximate capacity. | S | ||
| Automatic Transmission Fluid | In-Line4 | 4.30 QTS. | 4.06 L | ACURA Automatic Transmission Fluid ATF-TYPE 2.0 | S | ||
| Brake Fluid | N/A | N/A | ACURA Heavy Duty DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.4L Eng | 1.66 GALS. | 6.28 L | 50/50 mix of HONDA Long-Life Antifreeze/Coolant Type 2 and distilled water | Includes: the coolant in the reserve tank and that remaining in the engine. | S | |
| Engine Oil | 2.4L Eng | Drain and Refill,w/Filter | 4.40 QTS. | 4.16 L | Genuine ACURA Motor Oil 0W-20. API Premium-grade 0W-20 detergent oil | S | |
| Engine Oil | 2.4L Eng | Drain and Refill,w/o Filter | 4.20 QTS. | 3.97 L | Genuine ACURA Motor Oil 0W-20. API Premium-grade 0W-20 detergent oil | S | |
| Fuel Tank | 17.20 GALS. | 65.1 L | S | ||||
| Transfer Case Fluid | 0.45 QTS. | 0.42 L | ACURA Hypoid Oil HGO-1, Hypoid Gear Oil: SAE 75W-85 or SAE 90 API- GL-4 or GL-5 | S | |||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | Use commercially-available windshield washer fluid only. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.