Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSACURA2015MDX BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEX (EXCEPT HYBRID)MULTI-VIEW CAMERA UNIT DTCS
2015 Acura MDX Base
Multi-View Camera Unit DTCS
2015 Acura MDX BaseSECTION Multi-View Camera Unit DTCS
| DTC | Detection Item | Malfunction |
|---|---|---|
| B14A1 | MVC CPU Error | |
| B14A2 | MVC EEPROM Error | |
| B14A5 | Battery Power Input Voltage Failure | |
| B14A6 | Front Camera Image Input Failure | |
| B14A7 | Rear Camera Image Input Failure | |
| B14A8 | Left Side Camera Image Input Failure | |
| B14A9 | Right Side Camera Image Input Failure | |
| B14AC | Shift Position ON Failure | |
| B14AD | Vehicle Speed Sensor Failure (Transmission Vehicle Speed Failure) | |
| B14AE | VSA System Malfunction | |
| B14AF | Camera Power Supply Voltage Failure | |
| B14B2 - Refer to: DTC Troubleshooting: B14B2, or DTC Troubleshooting: B14B2 (2017 2018 2019 2020) | View Change Signal Failure | |
| B14B5 | ASIC Failure | |
| B14B6 | SDRAM Failure | |
| B14B7 | Flash ROM Failure | |
| B14B8 | Communication Error Between CPU and ASIC | |
| B14B9 | Wheel Speed Sensor Failure | |
| B14BA | Steering Angle Sensor Failure 5 | |
| B14BC | Steering Angle Sensor Malfunction | |
| B14C0 | Lost Communication with A/T System | |
| B14C1 | Lost Communication with Gauge Control Module | |
| U1280 | Communication Bus Line Error on B-CAN | |
| U1281 | Lost Communication with MICU | |
| U128D - Refer to: DTC Troubleshooting: U128D (2017 2018 2019 2020), or DTC Troubleshooting: U128D(Multi View Camera Unit) | Lost Communication with Gauge Control Module |
Malfunction Message on DisplayÂ
| Malfunction | Display Indication | Condition |
|---|---|---|
| Camera Aiming Incomplete | The message "Do the multi view camera aiming" is displayed | Unusable |
| Black raster | ||
| The message "Please consult the dealer where the multi view camera can not be displayed" is displayed | ||
| Can not go back to Navigation display | ||
| Black raster | A part of the multi view camera image can not be displayed | |
| The message "Please consult the dealer where the multi view camera can not be displayed" is displayed | Multi view rear camera image can not be displayed | |
| The message "Please consult the dealer where you can not display the prediction guidelines" is displayed | Guidelines image can not be displayed |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.