Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Hydraulic Control
The valve bodies consist of the main valve body, the regulator valve body, the secondary valve body, the stator shaft support, and the manual valve body. They are installed to the torque converter housing. Fluid regulated by the regulator valve passes through the manual valve to the various control valves. All the clutches receive fluid from the shaft internal hydraulic circuit. Also, the hydraulic control body is adapted to the secondary valve body, which includes the main shift hydraulic circuit, the solenoid valve, the hydraulic switch, etc. to shorten the fluid passage and optimize the hydraulic pressure.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
