Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Acura TL BaseFACTORY OEM SERVICE PROCEDURE
Engine Electrical
ENGINE ELECTRICAL TORQUE SPECIFICATIONS
| Location | Item | Remark | Torque | |
|---|---|---|---|---|
| Starting system | Starter bolts | M/T model | 74 N.m (7.5 kgf.m, 54 lbf.ft) | |
| A/T model | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |||
| Starter harness clamp nut | 9 N.m (0.9 kgf.m, 7 lbf.ft) | |||
| Ignition system | Spark plugs | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Charging system | Alternator bolt (8 mm) | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Alternator bolt (10 mm) | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |||
| Alternator cable nut | 12 N.m (1.2 kgf.m, 8.7 lbf.ft) | |||
| Drive belt auto-tensioner bolt | 22 N.m (2.2 kgf.m, 16 lbf.ft) | |||
| Drive belt auto-tensioner pulley bolt | 56 N.m (5.7 kgf.m, 41 lbf.ft) | |||
|
NOTE:
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.