2012 Acura MDX V6-3.7LFACTORY OEM SERVICE PROCEDURE

Climate Control Unit Removal/Installation




Climate Control Unit Removal/Installation

1. Remove the audio unit Audio Unit Removal/Installation or audio-navigation unit Audio-Navigation Unit Removal/Installation.

2. Remove the self-tapping screws, and remove the climate control unit (A) from the audio-navigation unit.

Factory service manual diagram




3. Install the control unit in the reverse order of removal. After installation, operate the climate control unit in various functions to confirm that it works properly.

4. Run the self-diagnostic function to confirm that there are no problems in the system.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.