2011 Acura TL BaseFACTORY OEM SERVICE PROCEDURE

Torque Specifications - General: Driveline/Axle

DRIVELINE/AXLE SPECIFICATIONS CHART

Location Item Remark Torque
Driveline/axle Driveshaft spindle nut (24 mm)
  • Use oil on the seating surface
  • Use new nut
245 N.m (25.0 kgf.m, 181 lbf.ft)
Driveshaft spindle nut (26 mm)
  • Use oil on the seating surface
  • Use new nut
329 N.m (33.5 kgf.m, 242 lbf.ft)
Intermediate shaft dowel bolts Β  39 N.m (4.0 kgf.m, 29 lbf.ft)
Intermediate shaft flange bolt Β  39 N.m (4.0 kgf.m, 29 lbf.ft)
Heat shield bolts Β  22 N.m (2.2 kgf.m, 16 lbf.ft)
No. 1 propeller shaft nuts Use new nuts 72 N.m (7.3 kgf.m, 53 lbf.ft)
No. 3 propeller shaft bolts Use new bolts 72 N.m (7.3 kgf.m, 53 lbf.ft)
No. 1 support bearing bolts *2 Use new bolts 39 N.m (4.0 kgf.m, 29 lbf.ft)
No. 2 support bearing bolts *2 Use new bolts 39 N.m (4.0 kgf.m, 29 lbf.ft)
*1: Parts to be tightened in a particular order.
*2: Follow the S/M procedures closely for torque, sequence, and special steps.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.