2009 Acura CSX Base, StandardFACTORY OEM SERVICE PROCEDURE

Unit Check (Quick Check): XM

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  • This checks the GA-NET Bus line to the XM receiver
  • When connection is shown with NG, check the connection between the XM receiver and the audio-navigation unit
    • Fig 1: Screen Display - XM Connection
    G05989746Courtesy of AMERICAN HONDA MOTOR CO., INC.
Chapter Navigation
Return to Chapter: Unit Check (Quick Check)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.