WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the HDD is good, transfer it to the new audio-navigation unit If the HDD is NG, try this procedure to see if you can recover some information can be recovered

When replacing the audio-navigation unit, this function allows the dealer to transfer the client's personal data to the new audio-navigation unit The transferred information includes their Setup settings, and personal addresses The dealer inserts a USB memory device into the USB jack, and then selects the Save Users Memory function The two functions in this diagnostic screen are EXPORT and IMPORT EXPORT saves the client's data to the USB memory device, and IMPORT moves the USB memory device files to the new audio-navigation unit.

Fig 1: Screen Display - Save Users Memory

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Select EXPORT button to move the client's data from the original audio-navigation unit to the USB memory Select YES on the Export User Data Confirmation screen The process takes only a couple of seconds The system stores DAT files on the USB memory
NOTE: If the EXPORT button is grayed out, check the USB jack connector.

Chapter Navigation

Return to Chapter: System Diagnostic Mode

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Save Users Memory

Use the Manual With the Right Hardware

When to See a Mechanic