2009 Acura CSX Base, StandardFACTORY OEM SERVICE PROCEDURE

Navigation Display Unit

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

The display unit uses a liquid crystal display (LCD) The LCD is a 8-inch-diagonal, thin film transistor (TFT), strip type with 336,960 picture elements The color film and fluorescent light are laid out on the back of the liquid crystal film

NOTE: If the navigation volume and/or voice feedback is turned off, this feature is disabled
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.