2009 Acura CSX Base, StandardFACTORY OEM SERVICE PROCEDURE

HDD Navigation System: Notes

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

The 2009-2010 TL uses a HDD (hard disc drive) instead of a navigation DVD The HDD system improves route calculation and POI searching time, as well as these additional functions:

  • Ripping music to the HDD with on-board CDDB (CD database) information provided by Gracenote
  • Clients can save their personal pictures to the HDD and use the images as wallpaper when they are not using the navigation system
  • See the owner's manual or navigation system manual for more information

HDD updates include the latest map info, POI DB, and CDDB information The yearly update is available on DVD that is loaded onto the HDD When you order a reman unit, the latest software is loaded onto the HDD If a client wants to order an update, see ordering an update navigation DVD (see ORDERING AN UPDATE NAVIGATION DVDΒ )

The Gracenote CDDB is updated quarterly Clients can visit www.acura.com and download the latest update

The HDD shuts down to protect itself from damage:

  • If the audio-navigation unit internal temperature is 183 Β°F (84 Β°C) or higher
  • If the atmospheric pressure below about 9 psi (62 29 kPa) The atmospheric pressure signal from PCM via F-CAN

Warning of the temperature and the atmospheric pressure is displayed on the navigation screen as an error message

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.