Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Acura CSX Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Electrical
ENGINE ELECTRICAL SPECIFICATION
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Ignition coil | Rated voltage | 12V | ||
| Firing order | 1-3-4-2 | |||
| Spark plug | Type (K20Z2) | DENSO: SKJ20DR-M11 | ||
| Type (K20Z3) | DENSO: SK22PR-M11S | |||
| Gap | 1.0-1.1 mm (0.039-0.043 in.) | -- | ||
| Ignition timing | At idle Check the red mark | M/T (in neutral) | 8 ± 2° BTDC | |
| A/T (in N or P position) | 8 ± 2° BTDC | |||
| Drive belt | Tension | Auto-tensioner | ||
| Alternator | Output | At 13.5 V and normal engine temperature | 105 A | |
| Coil (rotor) resistance | 20°C (68°F) | 3.2-4.0 Ω | ||
| Slip ring O.D. | 14.4 mm (0.57 in.) | 14.0 mm (0.55 in.) | ||
| Brush length | 10.5 mm (0.41 in.) | 1.5 mm (0.06 in.) | ||
| Brush spring tension | 3.2 N (0.33 kgf, 0.7 lbf) | |||
| Starter | Output | 1.6 kW | ||
| Commutator mica depth | 0.40-0.50 mm (0.016-0.020 in.) | 0.15 mm (0.006 in.) | ||
| Commutator runout | 0.02 mm (0.001 in.) max. | 0.05 mm (0.002 in.) | ||
| Commutator O.D. | 28.0-28.1 mm (1.102-1.106 in.) | 27.5 mm (1.083 in.) | ||
| Brush length | 11.1 -11.5 mm (0.44-0.45 in.) | 4.3 mm (0.17 in.) | ||
| Brush spring tension | 13.7-17.7 N (1.40-1.80 kgf, 3.09-3.97 lbf) | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.