Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2008RLREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMFUEL SUPPLY SYSTEMFUEL TANK REPLACEMENT
2008 Acura RL
Fuel Tank Replacement
2008 Acura RLSECTION Fuel Tank Replacement
- Drain the fuel tank (see FUEL TANK DRAINING ).
- Reinstall the fuel tank unit.
- Remove the propeller shaft (see PROPELLER SHAFT REMOVAL ).
- Remove the rear differential (see REAR DIFFERENTIAL REMOVAL ).
- Jack up the vehicle, and support it with jackstands.
- Remove the fuel tank covers (A) and parking brake cable bolts (B).
- Disconnect the hoses (C). Slide back the clamps, then twist the hoses as you pull to avoid damaging them.
- Place a jack, or other support, under the tank (D).
- Remove the strap bolts, and let the straps (E) fall free.
- Remove the fuel tank. If it sticks to the undercoat on its mount, carefully pry it off the mount.
- Install the parts in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.