Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2008 Acura RL V6-3.5L
Alignment: Specifications
2008 Acura RL V6-3.5LSECTION Specifications
Caster
Caster angle 2° 10'±30'
(Maximum difference between the right and left side: 0° 45')
Camber
Camber angle:
Front -0° 08'±30'
Rear -1° 15'±30'
(Maximum difference between the right and left side: 0° 30')
Toe-in
Front toe-in 0±2 mm (0±0.08 in.)
Rear toe-in 2±2 mm (0.08±0.08 in.)
Turning Angle
Caster angle 2° 10'±30'
(Maximum difference between the right and left side: 0° 45')
Camber
Camber angle:
Front -0° 08'±30'
Rear -1° 15'±30'
(Maximum difference between the right and left side: 0° 30')
Toe-in
Front toe-in 0±2 mm (0±0.08 in.)
Rear toe-in 2±2 mm (0.08±0.08 in.)
Turning Angle
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.