Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2008RDXREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOWSRESETTING THE POWER WINDOW CONTROL UNIT
2008 Acura RDX
Resetting the Power Window Control Unit
2008 Acura RDXSECTION Resetting the Power Window Control Unit
NOTE:
The clear procedure must be done prior to the learn procedure even if the auto function is working.
Resetting the driver's or passenger's power windows is required when any of the following have occurred:
- Power window control unit (built into the driver's master switch) is replaced
- Power window regulator replacement or repair
- Power window motor replacement or repair
- Window run channel replacement or repair
- Driver's or passenger's door glass replacement or repair
- Power is removed from the power window control unit while the power window is moving.
- Turn the ignition switch ON (II),
- Move the driver's or passenger's window all the way down by using the driver's window DOWN switch.
- Open the driver's or front passenger's door.NOTE: Steps 4-7 must be done within 5 seconds of each other.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.