Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enable Conditions
2008 Acura RDXSECTION Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum |
|---|---|---|
| Elapsed time after starting the engine | 2.5 seconds | - |
| Duration of quick warm-up system operation after engine start-up | - | 40 seconds |
| Engine coolant temperature | 32 °F (0 °C) | 140 °F (60 °C) |
| Throttle position | Fully closed | |
| No active DTCs | P0010, P0011, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0122, P0123, P0125, P0222, P0223, P0299, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0341, P0506, P0507, P1009, P1116, P1128, P1129, P1233, P1234, P2101, P2118, P2122, P2123, P2127, P2128, P2135, P2138, P2176, P2227, P2228, P2229, P2263, P2646, P2647, P2648, P2649 | |
| Other | Vehicle stopped | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.