Enable Conditions

2008 Acura MDXSECTION Enable Conditions
ENABLE CONDITIONS CHART

Condition Minimum Maximum
Engine coolant temperature 14°F (-10°C)(1) -
68°F (20°C)(2)
Engine speed 500 rpm 6,500 rpm
MAP value(3) 500 rpm 23 kPa (6.7 in.Hg, 169 mmHg) -
2,000 rpm 22 kPa (6.4 in.Hg, 163 mmHg) -
Fuel feedback Other than during fuel cut-off operation
No active DTCs P0107, P0108, P0117, P0118, P0122, P0122, P0123, P0123, P0222, P0223, P0335, P0339, P0385, P0389, P1128, P1129, P2227, P2228, P2229
Other Test-drive on a flat road to avoid misdetection
(1) When starting the engine at an engine coolant temperature of more than 14°F (-10°C).
(2) When starting the engine at an engine coolant temperature of 14°F (-10°C) or less.
(3) Varies with driving conditions.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.