Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSACURA2007TSX AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOWSMASTER SWITCH REPLACEMENT

2007 Acura TSX Automatic

Master Switch Replacement

2007 Acura TSX AutomaticSECTION Master Switch Replacement

Carefully pry off the driver's door switch trim (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the power mirror and power window master switch connectors (A).

Fig 1: Identifying Power Mirror And Power Window Switch Connectors
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the four mounting screws, then remove the master switch (A) from the panel (B).

Fig 2: Identifying Master Switch And Panel With Mounting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.