2004 Acura MDX BaseFACTORY OEM SERVICE PROCEDURE

Log Data

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

This screen allows the factory to select log data to troubleshoot navigation system issues.

  • Normally there is no card in the PC Card Slot, and the PC slot door should always be closed. The screen should appear as shown.
    Fig 1: Diagnosis Screen Display - Log Data
    G05488672Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • However, if the factory provides a PC card and instructs you to insert it into the card slot (label side up). If instructed by the factory, select Gyro. Sensor Logs ON. Follow the factory procedure for gathering test data, and properly ending the test.
    Fig 2: Diagnosis Screen Display - Log Data
    G05488673Courtesy of AMERICAN HONDA MOTOR CO., INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.