Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Lock Assembly: Installation
2004 Acura 3.5RLSECTION Installation
- Insert the ignition key into the new steering lock body, and turn it to ACC position.
- Push the lock pin down, and insert the steering lock body into the steering column until it clicks into place.
- Loosely install new shear bolt.
- Make sure the steering wheel lock operates smoothly, and that the ignition key turns freely.
- Tighten the shear bolt until the hex head twists off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.