Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Wheel Alignment Specifications
2004 Acura 3.5RLSECTION Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | |||||
|---|---|---|---|---|---|---|---|
| Camber (1) | |||||||
| Front | 0 | -1 To 1 | |||||
| Rear | - .5 | -1.5 To .5 | |||||
| Caster (1) | |||||||
| Front | 2.83 | 1.83 To 3.83 | |||||
| Toe-In (2) | |||||||
| Front | 0 | -.06 To .06 (-2 To 2) | |||||
| Rear | .06 (2) | 0 To .12 (0 To 4) | |||||
| Toe-Out On Turns (1) | |||||||
| Inner | 41.5 | N/A | |||||
| Outer | 33.9 | N/A | |||||
| Turning Angle (1) | |||||||
| Inward Wheel | 41.5 | 39.5 To 43.5 | |||||
| Outward Wheel (Reference) | 33.9 | N/A | |||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.