2003 Acura 3.2TL BaseFACTORY OEM SERVICE PROCEDURE

Diagnostic Trouble Code Definitions

DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC (MIL) Description
P0107  Manifold Absolute Pressure Sensor Circuit Low Voltage/Input
P0108  Manifold Absolute Pressure Sensor Circuit High Voltage/Input
P0112  Intake Air Temperature Sensor Circuit Low Voltage/Input
P0113  Intake Air Temperature Sensor Circuit High Voltage/Input
P0116  Engine Coolant Temperature Sensor Range/Performance Problem
P0117  Engine Coolant Temperature Sensor Circuit Low Voltage/Input
P0118  Engine Coolant Temperature Sensor Circuit High Voltage/Input
P0122  Throttle Position Sensor Circuit Low Voltage/Input
P0123  Throttle Position Sensor Circuit High Voltage/Input
P0128  Thermostat Range/Performance Problem
P0131  Primary Heated Oxygen Sensor Circuit Low Voltage
P0132  Primary Heated Oxygen Sensor Circuit High Voltage
P0133  Primary Heated Oxygen Sensor Circuit Slow Response
P0135  Primary Heated Oxygen Sensor Heater Circuit Malfunction
P0137  Secondary Heated Oxygen Sensor Circuit Low Voltage
P0138  Secondary Heated Oxygen Sensor Circuit High Voltage
P0139  Secondary Heated Oxygen Sensor Slow Response
P0141  Secondary Heated Oxygen Sensor Heater Circuit Malfunction
P0171  Fuel System Too Lean
P0172  Fuel System Too Rich
P0300  Random Misfire
P0301  Cylinder No. 1 Misfire Detected
P0302  Cylinder No. 2 Misfire Detected
P0303  Cylinder No. 3 Misfire Detected
P0304  Cylinder No. 4 Misfire Detected
P0305  Cylinder No. 5 Misfire Detected
P0306  Cylinder No. 6 Misfire Detected
P0325  Knock Sensor Circuit Malfunction
P0335 (5) Crankshaft Position Sensor "A" Circuit Malfunction
P0336 (5) Crankshaft Position Sensor "A" Intermittent Interruption
P0335 (6) Crankshaft Position Sensor "A" Circuit Malfunction
P0336 (6) Crankshaft Position Sensor "A" Range/Performance Problem
P0340 (6) Camshaft Position Sensor "A" Circuit Malfunction
P0341 (6) Camshaft Position Sensor "A" Circuit Range/Performance Problem Interruption
P0365 (6) Camshaft Position Sensor "B" Circuit Malfunction
P0366 (6) Camshaft Position Sensor "B" Circuit Range/Performance Problem Interruption
P0385 (6) Crankshaft Position Sensor "B" No Signal
P0386 (6) Crankshaft Position Sensor "B" Intermittent Interruption
P0401  Exhaust Gas Recirculation Insufficient Flow Detected
P0420  Catalyst System Efficiency Below Threshold
P0451  Fuel Tank Pressure Sensor Range/Performance Problem
P0452  Fuel Tank Pressure Sensor Low Voltage
P0453  Fuel Tank Pressure Sensor High Voltage
P0505  Idle Control System Malfunction
P0700 (1) Automatic Transaxle
P0710 (1) Automatic Transaxle
P0715 (6) Mainshaft Speed Sensor Circuit Malfunction
P0720 (6) Countershaft Speed Sensor Circuit Malfunction
P0715 (1) Automatic Transaxle
P0720 (1) Automatic Transaxle
P0730 (1) Automatic Transaxle
P0740 (1) Automatic Transaxle
P0753 (1) Automatic Transaxle
P0758 (1) Automatic Transaxle
P0763 (1) Automatic Transaxle
P0780 (1) Automatic Transaxle
P1106  Barometric Pressure Sensor Range/Performance Problem
P1107  Barometric Pressure Sensor Circuit Low Voltage
P1108  Barometric Pressure Sensor Circuit High Voltage
P1121  Throttle Position Sensor Signal Lower Than Expected
P1122  Throttle Position Sensor Signal Higher Than Expected
P1128  Manifold Absolute Pressure Sensor Signal Lower Than Expected
P1129  Manifold Absolute Pressure Sensor Signal Higher Than Expected
P1259  Variable Valve Timing & Lift Electronic Control System Malfunction
P1297  Electrical Load Detector Circuit Low Voltage
P1298  Electrical Load Detector Circuit High Voltage
P1361  Camshaft Position Sensor "A" Intermittent Interruption
P1362  Camshaft Position Sensor "A" No Signal
P1366  Camshaft Position Sensor "A" Intermittent Interruption
P1367  Camshaft Position Sensor "A" No Signal
P1456  Evaporative Emission Control System Leak Detected (Fuel Tank System)
P1457  Evaporative Emission Control System Leak Detected (EVAP Control Canister System)
P1486 (4) Thermostat Range/Performance Problem
P1491  Exhaust Gas Recirculation Valve Insufficient Lift Detected
P1498  Exhaust Gas Recirculation Valve Lift Sensor High Voltage
P1519  Idle Air Control Valve Circuit Malfunction
P1607  Powertrain Control Module Internal Circuit Malfunction
P1656 (2) (1) Automatic Transaxle
P1676 (5) Frame-To-Powertrain Torque Down Request Signal Line Failure
P1678 (5) Frame-To-Powertrain Torque Down Request Signal Line Failure
P1705 (1) Automatic Transaxle
P1706 (1) Automatic Transaxle
P1709 (1) Automatic Transaxle
P1710 (3) (1) Automatic Transaxle
P1738 (4) (1) Automatic Transaxle
P1739 (1) Automatic Transaxle
P1740 (3) (1) Automatic Transaxle
P1750 (3) (1) Mechanical Problem In Hydraulic System
P1751 (3) (1) Mechanical Problem In Hydraulic System
P1753 (1) Automatic Transaxle
P1768 (1) Automatic Transaxle
P1773 (1) Automatic Transaxle
P1778 (3) (1) Automatic Transaxle
(1) See appropriate DIAGNOSIS article in AUTOMATIC TRANSMISSIONS.
(2) DTC not used on J32A1 engine.
(3) DTC not used on 3.2TL.
(4) DTC not used on 3.2CL.
(5) A/T only.
(6) M/T only.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.