2003 Acura 1.7EL%20StandardFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 1.20 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid Drain and Refill 2.90 QTS. 2.74 L HONDA Automatic Transmission Fluid ATF-Z1 S
Automatic Transmission Fluid N/A N/A S
Automatic Transmission Fluid Total Capacity 6.30 QTS. 5.96 L HONDA Automatic Transmission Fluid ATF-Z1 S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Brake Fluid N/A N/A S
Engine Coolant N/A N/A S
Engine Coolant Standard Trans Drain and Refill 4.10 QTS. 3.88 L HONDA ALL Season Antifreeze/Coolant Type 2 S
Engine Coolant Standard Trans Total Capacity 5.20 QTS. 4.92 L HONDA ALL Season Antifreeze/Coolant Type 2 S
Engine Oil Drain and Refill,w/Filter 3.70 QTS. 3.5 L API - HONDA Motor Oil, SAE 5W-20 Detergent Oil S
Engine Oil Drain and Refill,w/o Filter 3.50 QTS. 3.31 L API - HONDA Motor Oil, SAE 5W-20 Detergent Oil S
Engine Oil N/A N/A S
Engine Oil Total Capacity 4.40 QTS. 4.16 L API - HONDA Motor Oil, SAE 5W-20 Detergent Oil S
Fuel Tank 13.20 GALS. 49.96 L S
Fuel Tank N/A N/A S
Manual Transmission Fluid Drain and Refill 1.60 QTS. 1.51 L Geniune HONDA Manual Transmission Fluid S
Manual Transmission Fluid N/A N/A S
Manual Transmission Fluid Total Capacity 1.70 QTS. 1.6 L Geniune HONDA Manual Transmission Fluid S
Power Steering Fluid N/A N/A Geniune HONDA Power Steering Fluid S
Power Steering Fluid N/A N/A S
Windshield Washer Fluid 4.80 QTS. 4.54 L S
Windshield Washer Fluid N/A N/A S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.