Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2002 Acura RSX L4-2.0L (VTEC)FACTORY OEM SERVICE PROCEDURE

Design Specifications

Starter	Type		Gear reduction
	Normal output		1.2 kW
	Nominal voltage		12 V
	Hour rating		30 seconds
	Direction of rotation		Clockwise as viewed from gear end
Electrical ratings	Battery		12V - 36 AH/5 hours
	Starter		12V - 1.1 kW, 1.2 kW
	Alternator		12V - 95A, 90A
	Fuses	Under-hood fuse relay box	100 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
		Under-dash fuse relay box	20 A, 15 A, 10 A, 7.5 A
	Light bulbs	Headlight high beam	12V - 55W
		Headlight low beam	12V - 55W
		Front turn signal lights	12V - 21W
		Front parking lights	12V - 5W
		Rear turn signal lights	12V - 21W
		Rear side marker lights	12V - 5W
		Brake/taillights	12V - 21/5W
		High mount brake light	12V - 21W
		Back-up lights	12V - 21W
		License plate light	12V - 5W
		Ceiling light	12V - 8W
		Cargo area light	12V - 5W
		Spotlights	12V - 8W
		Gauge lights	LED
		Indicator lights	LED

Chapter Navigation

Return to Chapter: System Specifications

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.