Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Acura RSX L4-2.0L (VTEC)FACTORY OEM SERVICE PROCEDURE
Main Relay (Computer/Fuel System): Description and Operation
PGM-FI Main Relay 1 and 2
The PGM-FI relay consists of two separate relays. The PGM-FI main relay 1 is energized whenever the ignition switch is ON (II) to supply battery voltage to the ECM/ PCM, power to the injectors, and power for PGM-FI main relay 2. The PGM-FI main relay 2 is energized to supply power to the fuel pump for 2 seconds when the ignition switch is turned ON (II), and when the engine is running.
The PGM-FI relay consists of two separate relays. The PGM-FI main relay 1 is energized whenever the ignition switch is ON (II) to supply battery voltage to the ECM/ PCM, power to the injectors, and power for PGM-FI main relay 2. The PGM-FI main relay 2 is energized to supply power to the fuel pump for 2 seconds when the ignition switch is turned ON (II), and when the engine is running.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.