2002 Acura 3.2TL BaseFACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Switches

SWITCHES LOCATION

Component Component Location
A/C Pressure Switch On receiver-drier.
Brake Fluid Level Switch Integral to brake fluid reservoir cap.
Brake Pedal Position Switch Behind driver's dashboard lower cover.
Front Passenger's Power Seat Adjustment Switch On right side of passenger's seat.
Moon Roof Limit Switch At rear center of ceiling.
Oil Pressure Switch On lower right front of engine.
Parking Brake Switch On parking brake pedal bracket.
PSP Switch On lower center rear of engine compartment.
Radiator Fan Switch "A" At top rear of engine, left of throttle body. See Figure.
Radiator Fan Switch "B" On top left side of engine. See Figure.
Transmission Range Switch On transaxle.
VTEC Pressure Switch On lower right front of engine.
2nd Clutch Pressure Switch On transaxle.
3rd Clutch Pressure Switch On transaxle.
4th Clutch Pressure Switch On transaxle.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.